MK TS493 XT Pneumatic Applicator for Two-Part Materials
A 2-component pneumatic bead dispenser for 600mL cartridges.
Specifications:
Lightweight: 2.6kg / 5.6lbs
Cartridge Holder Length: 235mm / 9.3in
Maximum Thrust: 4kN
Maximum Pneumatic Pressure: 8bar / 116psi
Air Consumption: 40 litres/min
Handle Material: Reinforced Nylon
Cartridge Holder Material: Aluminum
Frame Material: Steel
Tool Component Approvals: CE
Cartridge Capacity: 600mL (21.1oz)
Cartridge Ratio: 1:1
Viscosity: Medium
Standard Color: Black/Red
MK TS488 XM Pneumatic Applicator for Two-Part Materials
A 2-component pneumatic bead dispenser for 600mL cartridges.
Specifications:
- Lightweight: 2.5kg / 5.5lbs
- Cartridge Holder Length: 270mm / 10.6in
- Maximum Thrust: 4kN
- Maximum Pneumatic Pressure: 8bar / 116psi
- Air Consumption: 40 litres/min
- Handle Material: Reinforced Nylon
- Cartridge Holder Material: Aluminum
- Frame Material: Steel
- Tool Component Approvals: CE
- Cartridge Capacity: 600mL (21.1oz)
- Cartridge Ratio: 1:1
- Viscosity: Medium
- Standard Color: Black/Grey/Red
MK TS444 KX Pneumatic Applicator for Two-Part Materials
A 2-component pneumatic bead dispenser for 365/385/585mL cartridges.
Specifications:
- Lightweight: 3.05kg / 6.80lbs
- Cartridge Holder Length: 278mm / 11in
- Maximum Thrust: 4kN
- Maximum Pneumatic Pressure: 8bar / 116psi
- Air Consumption: 40 litres/min
- Handle Material: Reinforced Nylon
- Barrel Material: Aluminum
- Cartridge Holder Material: Steel
- Tool Component Approvals: CE
- Cartridge Capacity: 365mL (12.8), 385mL (13.5oz), 585mL (20.6oz)
- Cartridge Ratio: 3:1
- Viscosity: Medium
- Standard Color: Black/Red
MK TS483 LXM Pneumatic Applicator for Two-Part Materials
A 2-component pneumatic bead dispenser for 400mL cartridges.
Specifications:
- Lightweight: 2.6kg / 5.6lbs
- Cartridge Holder Length: 189mm / 7.4in
- Maximum Thrust: 2.7kN
- Maximum Pneumatic Pressure: 8bar / 116psi
- Air Consumption: 40 litres/min
- Handle Material: Reinforced Nylon
- Cartridge Holder Material: Aluminum
- Frame Material: Steel
- Tool Component Approvals: CE
- Cartridge Capacity: 400mL (14.1oz)
- Cartridge Ratio: 1:1
- Viscosity: Low/Medium
- Standard Color: Black/Red
MK TS483 XM Pneumatic Applicator for Two-Part Materials
A 2-component pneumatic bead dispenser for 400mL cartridges.
Specifications:
- Lightweight: 2.6kg / 5.6lbs
- Cartridge Holder Length: 203mm / 8in
- Maximum Thrust: 4kN
- Maximum Pneumatic Pressure: 8bar / 116psi
- Air Consumption: 40 litres/min
- Handle Material: Reinforced Nylon
- Cartridge Holder Material: Aluminum
- Frame Material: Steel
- Tool Component Approvals: CE
- Cartridge Capacity: 400mL (14.1oz)
- Cartridge Ratio: 1:1
- Viscosity: Medium/High
- Standard Color: Black/Red
Brandywine Materials
308 East School Street
Woonsocket, RI 02895
Phone: 401-526-9856
Fax: 401-386-2440
admin@brandywinematerials.com
- Static Mixers
– Sulzer Mixpac, Quadro and Statomix
– Nordson In-Line and Disposable Plastic
- Cartridges – Sulzer Mixpac and Sulzer Quadro Plastic Two-Component, Side-by-Side
- Dispensers – Mixpac, MK and COX Manual, Pneumatic and Battery Dispensers and Applicators
- Cartridges & Syringes – Nordson, for One and Two-Component Adhesives
- Dispensing Systems – Sulzer Mixpac Adhesive
- Adhesives – for Industrial Applications